Audiopipe APCL-1500.1D on AD-1 Full Testing Results

We recently posted the AD-1 testing of the Audiopipe APCL-1500.1D monoblock amplifer at .5 ohms. Which delivered some ground breaking results. To view that post click here.

And, just as we promised in that post. That when the full testing of the Audiopipe APCL-1500.1D was posted by Big D Wiz who did the tested on the AD-1 was released. We would update the post.

Well, here it is.. the full review, and results of the Audiopipe APCL-1500.1D monoblock amplifer. As previously stated this video is property of Big D Wiz of Old School Stereo.com. Disclaimer: we are not affiliated with OldSchoolStereo.com We are just sharing the results of a budget amplifier that deserves its respect. Video is below of the full review. Test is ran at 4 ohms, 2 ohms, and 1 ohm. With a special testing of the amplifier ran at .5 ohms.

Impressed yet? If you didn't watch the full review, and only want the numbers that the Audiopipe APCL-1500.1D produced. Here they are:

• Certified run at 4 ohms: 526 Watts RMS, Uncertified run at 4 ohms: 548 Watts RMS, Dynamic run at 4 ohms: 573 Watts RMS.

• Certified run at 2 ohms: 891 Watts RMS, Uncertified run at 2 ohms: 984 Watts RMS, Dynamic run at 2 ohms: 1085 Watts RMS.

• Certified run at 1 ohms: 1314 Watts RMS, Uncertified run at 1 ohms: 1458 Watts RMS, Dynamic run at 1 ohms: 2024 Watts RMS.

• Special Dynamic run at .5 ohms: 2753/2810 Watts RMS.

Again, like said in the previous post the Audiopipe APCL-1500.1D is a power house monoblock amplifier with a nice price. It does its close to rated wattage, at 4 ohms, and over at 2, and 1 ohms. Even though its not rated at .5 ohms it does almost double it rated wattage. Which is great for amplifier that doesn't break the bank.

Don't know how the test was ran? Let us explain.. in a certified run with the AD-1 a sine wave is played at 40Hz until  the point of 1% distortion, and the test is stopped. The AD-1 records the wattage output up til the point where it is stopped. Uncertified run is done the same as the certified run, but is ran up til clipping of the signal. Again the AD-1 records the wattage output of the amplifer until the test is stopped. Dynamic run is a little different from Certified, and Uncertifed. The Dynamic run is made to recreate the idea of the amplifier is playing music. A pulsating sine wave of 40Hz is played, and the AD-1 records the wattage output.

What test matters? For most the Dynamic test matter most since it is the most accurate in the situation of the amplifiers usage for most people.

Read More

Scosche Electronics HD Series Speaker Review

When you think of Scosche products. The first thing that usually comes to mind is Wal-Mart. Since Scosche products have been found in Wal-Mart for the longest of time. With such products such as Wiring Kits, Dash Kits, RCA Cables, Speaker Wire, In-Line Fuse Holders, Fuses, and many more.

And, the biggest down fall of a company that makes just about everything. Is that their products tend to lack quality for they make a large quantity of products. But, with Scosche that is not a problem. As to making so many products. The quality of these speaker are as close to prime quality without the prime quality price. For example the HD Series car speakers they make. Yes, you read that correctly. Outside of the large numbers of add-on Scosche makes for car audio. They indeed do make car audio speakers with the HD Series being one of three lines. The other series that Scosche makes are called EFX, and REALM. But, the HD Series is easier to get to than the others.

The HD Series car speakers you can pick up at your local Wal-Mart store in the car audio section. But, why would you pick up Scosche brand speakers when you have other brands to chose from at Wal-Mart. Like Sony, Pioneer, Kicker, and Dual. Well, maybe this review can help you decide a little better next time your in search for some aftermarket door speakers.

Scosche decided with their series to reach all speaker sizes. From 4 inch  to 6.5-6.75 inch to 4x6s, 5x6s, and finally 6x9s. A size fit for any vehicle. Now what point did that make? A lot of brands only make sizes that are popular. Most company choose to make 6.5-6.75, and 6x9 speakers more than the rest of the sizes that are in between to save on resources of certain sizes not selling at all.

Well, for Scosche that's great that they make all sizes of speakers. But, the question that stands is.. ARE THEY WORTH THE MONEY? Well, the answer to that is simple. YES! For the price these speakers are well worth their price tag. In which the price varies per speaker size. But, no matter the size these speakers are in. They all deliver with great sound quality, and music reproduction. These triaxial speakers as Scosche labels them. Perform great with just power output of the standard aftermaket head unit. But, put these speakers on a external amplifier. And, they really shine.

The HD Series speakers on a external amplifier deliver crisp highs, with a great mid-range frequency, and a punchy low bass. Whereas some car speaker mix all these frequencies together. Making listening not so great, and music reproduction sounding sloppy with clipping, and distortion. The built in crossover on the HD Series take care of those problems. Meaning no bass in your highs, and no highs in your bass. Creating a even sounding experience. The IMPP molded polypropylene cone gives these speakers not only a great look, but added durability in construction for music reproduction .

Now wattage to these speakers varies among sizes, but they all have a common variable of 50 watts RMS. Just about all the sizes are built as followed with 1 inch copper voice coils, 0.6 inch tweeter, 0.7 mid range, and 13 to 20 oz magnets. But, specs can't always describe how well a speaker will perform. If your in the market for some new speakers for your car. And, looking for some nice, that will sound amazing, and won't break the bank. Stop buy your nearest Wal-Mart pick up a pair of Scosche HD Series speakers, and try them for yourself. You won't be disappointed at all.

Where to get the Scosche HD Series, or EFX, and REALM series speakers. You can pick the HD Series speakers at your local Wal-Mart, or online at Scosche website

Read More

Audiopipe ACPL1500.1D on AD-1 Amp Dyno - The Numbers Will Suprise You!

We've done a previous post about Audiopipe amplifiers. And, you can read that here. But, since the publishing of that article. Audiopipe has discontinued the AP line that we reviewed. Now in that article we spoke about the new line that would be replacing the AP line. And, that was the APCL line.

But, the question that stood to all consumers of Audiopipe products. Would they stand by the APCL line of amplifiers as they did the AP line? Would the APCL line be as powerful as the AP line? Would the pricing change? Well, as time has progressed some of those answers have been answered.

There have been some Audiopipe customers who have stood by the brand even with the discontinue of their favorite line, and have purchased the APCL line. And, found that the APCL to be as adequate to the AP line, or maybe even better. Now as far as power stands with the APCL line. That answer has came with some hard evidence. The video below provided by Big D Wiz of OldSchoolStereo.com put all the doubts to rest.

Now this test was ran at 0.5 ohms which is really pushing the limit of this 1 ohm stable amplifier. But, the APCL line have proven that it is now joke. Putting out a whopping 2810 watts. That's 1310 watts over the amps dynamic output of 1500 watts. Now imagine running this amplifier at 1 ohm. Estimation wattage is around 2300 watts. That is a estimation figure. Big D Wiz said that he will upload the full test of the APCL-1500.1D onto his channel.  If you don't know how this test was ran. Here is the answer. The AD-1 Dynamic RMS Power test is simulating as if this amplifier is in car, and playing music in real world terms. Sending a sine wave in short burst, rather than one long tone. Which is simulating the bass of a actual song. The AD-1 will read the cleanest output of wattage from the amplifier, and display the maximum RMS rating of the amplifier that was produced before clipping. Check back for the full AD-1 test on the Audiopipe APCL-1500.1D.

Read More

Project Kady 2.0 Is Now Underway

Project Kady 2.0 is now underway for Aye Kaye Audio. The premier vechile for the company has been in need of a upgrade for some time. And, now it has begun. Kaye Khaos has been documenting this process via his Youtube page.

As of now Project Kady 2.0 consist of some interior, and exterior changes. As of now the Silverado has been debadged. And, the process of interior work has started with the Dash Bezel of the 2003 Chevy Silverado. There was an attempt before to paint this part of the interior, but now its going into its permant color state. With some minor custom work done. You can see part one of this process below in the video montage.

Now that the dash bezel painting process is on hold for now. And, Kaye Khaos took it upon himself to do another part of the vehicle. By smoking out the taillights, and day time running lights of the vehicle. There is also a video on that below. A small mini vlog update on whereas this project is going, and the proper introduction to Project Kady 2.0. As Project Kady 2.0 progress this post will be updated. As for what next in the project. Kaye Khaos said in his vlog that the headlights are next to be smoked on the vehicle.  Check back regular to this post for more updates, or check the Project Kady 2.0 list on Youtube here.

Read More

Aye Kaye Audio - Instagram Bass Compilation

As of late the internet has been going crazy with Vine videos, and Vine compilation of the week via Youtube. Well, now that Instagram provides video recording, and there are many bass heads on sites like Vine, and Instagram. Why haven't any of these bass heads posted a compilation video of some bass, and flex?

That is a question that Kaye Khaos stood to answer. With maybe the first ever Instagram video bass compilation.

Is its the first? Well, that's a unanswered question. Since there is none on Youtube anywhere. But, as previously stated Kaye Khaos of Aye Kaye Audio made the stand to bring the Instagram video compilation to the bass heads.

Below you can see the bass compliation that Kaye Khaos put together of his system in his 2003 Chevy Silverado, with some mirror flex. Its nothing special, but it may be part of a long line of bass compilations to come.

Read More

Dual XPE2700 - 2 Channel Amplifier Review

When you think of Dual. You'll most likely think of Wal-Mart. Since Dual has been a brand of car audio equipment that Wal-Mart has branded for years. And, what good quality equipment can you get from Wal-Mart?

Well, you're in for a surprise. Especially about the Dual XPE2700, 2 Channel, 400 watt amplifier. And, yes 2 channel amplifiers are possibly the most over looked amplifiers on the market. As in being the most common purchased amplifiers are 4 channels, and up. Along with monoblock amplifiers among car audio enthusiast.

Unlike most amplifiers the model name of the XPE2700 is definitely a curveball. Since most amplifier model names come from the product line, and wattage of the amplifier. Something like XPE400.2 would be a more appropriate name of a product like this. Because seeing a model name like XPE2700 is like saying this little amplifier can put out 2700 watts of power. Yet, that's not the case with this product.

Besides a misleading model name. This amplifier can be placed among one of the best budget amplifiers on the market. Is that speaking for the rest of the XPE line from Dual? Well, that's another review for another day.

But, lets get back to the topic of the matter. The Dual XPE2700 as previously stated is a 2 channel amplifier capable of 400 watts of output. And, that wattage statement is very true with this amplifier. Since the XPE2700 amplifier is CEA rated. CEA RATED YOU SAY? Told you guys that you'd would be surprised what you find in Wal-Mart.

So, lets get into the hard facts about the XPE2700 amplifier. This product is very well built. Sporting a cast aluminium body, built in heat sinks, silver plated RCA, and speaker terminals. That can fit up to 8 gauge speaker, power, and ground wiring. With an output of 50 watts at 4 ohms, 75 watts at 2 ohms, 150 watts at 4 ohms (bridged), and 400 watts at 2 ohms (bridged). MOSFET power supply with variable high, and lowpass filter. Ranging up to 500hz on the high, and 50hz on low end. With select-able bass boost at 0, 6, and 12 decibels at 50hz. The Dual XPE2700 is not a 1 ohm stable amplifier, but it is 2 ohms stable.

With all that information. The question that stands is the Dual XPE2700, 2 channel, 400 watts amplifier recommended? The answer... YES! This amplifier is perfect for a budget, low wattage beginner system. The Dual XPE2700 can do its rated wattage, and a little more with a strong enough power input. A perfect pick for a sub, and component (front or rear) setup. Or, it can be used just as a subwoofer amplifier bridged for one channel output, and visa versa for a component setup. But, whatever the application the amplifier is used for. It is definitively a steal with $55.00 price tag on it.

But, the only tricky part is.. to some car audio dealers as in Sonic Electonix to name one. The XPE line from Dual is a discontinued line. But, the Dual XPE2700, and many other amplifiers from the XPE line can be found online, or maybe even at your local Wal-Mart store.

Read More

Sony CDX-700HD CD Receiver Review

In the world of car audio receivers there are a million, and one companies that make them. But, only few stand out as the cream of the crop.

And, it is always difficult to say which one is best. Well, lets make this easy. The Sony CDX-GT700HD CD Receiver is most definitely on that list.

But, as many would audiophiles would say. Sony? Yes, Sony! For years Sony has been the jack of all trades in the world of media consumption. From TVs, DVD players to Surround Sound components, and receivers. And, in the car audio world also. Making budget subwoofers, door speakers, and head units. And, with making so many products. Some are better than others. And, the CDX-GT700HD CD Receiver is one of them.

Reasons why? This is a well made receiver packing some nice features. For a reasonable price. The CDX-GT700HD CD Receiver is HD Radio compatible. And, has seamless integration with Satellite Radio. Plus it is iPhone, iPod, iPad ready. And, the CDX-GT700HD can play USB sticks. Multiple sound formats as in MP3, WMA, and WAV files. Making playing your own music on this receiver a breeze. Allowing the user to control their devices directly though the unit itself, and having clear ID3 tagging on the screen. Letting the user know what song is playing. The unit also carrying a feature Sony calls ZAPPING.

What is zapping? Zapping is a 6, 9, or 30 second preview of multiple songs. Allowing the user to skip through songs without continuously hitting the skip button. Until the user finds a song of their preferred listening pleasure. This is a iconic feature to few Sony receivers. So, what else does this unit have in store?

The CDX-700HD CD Receiver delivers 52 watts of peak power to all four speakers while DSO, and the EQ3 stage 2 feature allows the user to adjust the mix for a dynamic listening experience. The use of the built in front, rear, and subwoofer pre-outs allows the user the power to customize output of your external amplifiers, and other components with the built in  Low Pass, and High Pass filters of the unit.

And, as most units of the last decade the CDX-700HD CD Receiver has dual color illumination of a electric blue, and glowing green. This unit also comes with a wireless remote, and your basic connection harness, mounting cage, and front plate.

So, what is bad about this product? Not a thing. Its a perfect replacement unit for a factory receiver. With the crisp sound it delivers, and added features to enhance sound. The unit is definitely worth its money. Perfect for any audiophile who likes detailed sound. And, lets not forget the car audio enthusiast who has a custom set-up as in a iPad in-dash. This unit gives the user that seamless integration of the iPad to external speakers, amplifiers, and components. With the extra ability to customize the sound, and something that looks extremely nice in the looks department.

Recommended? Yes, highly recommended for anyone looking into a replacement head unit at a decent price, and loaded with features. In what this unit does lacks. Like Bluetooth compatibility. It makes up for in another. Where to purchase you ask? That's easy! The Sony CDX-700HD CD Receiver can be purchased from Amazon.com

Read More